Skip to content

AU

FREE SHIPPING ON ORDERS OVER $550 IN SELECTED AREAS

3cb97a6ff595ba580ccfb8ec41c45c22b8307708.jpg

TP-Link Omada SG5452X network switch Managed L3 Gigabit Ethernet (10/100/1000) Black

Regular price $1,675.49
Sale price Regular price

Key specifications

  • Internal memory: 1.95GB
  • Product colour: Black
  • Switch type: Managed
  • Operating temperature (T-T): -5 - 45 °C
  • Operating relative humidity (H-H): 10 - 90%
  • Networking standards: IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt
  • Basic switching RJ-45 Ethernet ports quantity: 48
  • Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000)
  • Power over Ethernet (PoE): No
  • Switching capacity: 176 Gbit/s
  • MAC address table: 16000 entries
  • 10G support: Yes
  • Storage relative humidity (H-H): 5 - 90%
  • LED indicators: Yes
  • Quality of Service (QoS) support: Yes
  • Rack mounting: Yes
  • Jumbo frames support: Yes
  • Switch layer: L3
  • Forwarding rate: 130.94 Mpps
  • Jumbo frames: 9000

Certificates

Compliance certificates
CE, Federal Communications Commission (FCC), RoHS

Data transmission

Packet buffer memory
12MB
Store-and-forward
Yes

Design

Stackable
Yes

Management features

ARP inspection
Yes
Cloud-managed
Yes
Web-based management
Yes

Multicast features

Multicast support
Yes

Network

Broadcast storm control
Yes
Link aggregation
Yes
Number of VLANs
4000
Port mirroring
Yes
Virtual LAN features
MAC address-based VLAN, Private VLAN, Protocol-based VLAN, Voice VLAN
VLAN support
Yes

Operational conditions

Heat dissipation
116.42 BTU/h
Storage temperature (T-T)
-40 - 70 °C

Other features

Bandwidth
88 Gbit/s
Management level
4

Packaging content

Cables included
AC
Quick start guide
Yes
Rack mount kit
Yes

Performance

Built-in processor
Yes
Fanless
Yes
Firmware upgradeable
Yes
Flash memory
512MB
Mean time between failures (MTBF)
211.644 h
Memory type
DRAM
Physical stacking (units)
4
Processor frequency
1200 MHz
Processor manufacturer
ARM
Telnet
Yes

Ports & interfaces

Console port
RJ-45
Gigabit Ethernet (copper) ports quantity
48
SFP+ module slots quantity
4
USB 2.0 ports quantity
1
USB Type-C ports quantity
1

Power

AC input frequency
50/60 Hz
AC input voltage
100 - 240 V
Power consumption (max)
34.1 W
Power source
AC
Power supply included
Yes
Surge protection
Yes
Surge protection voltage
6 kV

Security

Access Control List (ACL)
Yes
DHCP features
DHCP relay, DHCP server
IGMP snooping
Yes
IP-MAC-Port binding
Yes
MAC address filtering
Yes
Password protection
Yes
Security algorithms
SNMP, SNMPv2, SNMPv3
SSH/SSL support
Yes
Static port security
Yes

Weight & dimensions

Depth
22 cm
Height
4.4 cm
Width
44 cm

THE NUTEC ADVANTAGE

VENDOR NEUTRAL

Advice focused on the solution that best fits your business needs.

END TO END DELIVERY

From selection through implementation, support, and beyond.

BUSINESS FIRST OUTCOMES

Delivering solutions focused on measurable outcomes.

LONG TERM PARTNERSHIP

Built on trust, support, and shared success.

Compare With Similar Items

Description
What This Product Does

Omada SG5452X is a dependable entry-level L3 switch tailored for the access layer, featuring L3 routing, fast 10 Gbps wired speeds, and stacking options. It includes 48× gigabit RJ45 ports, 4× 10 Gbps SFP+ slots, physical stacking ability, and centralized management. Integrated with strong security and extensive management features, the SG5452X offers a reliable networking solution for SMEs, and ISPs.

High-speed Connectivity and Powerful Stacking

48× gigabit RJ45 ports and 4× 10 Gbps SFP+ slots provide up to 176 Gbps switching capacity per unit. Up to 4 units of physical stacking empower the networking structure with built-in redundancy and performance.

Abundant Layer 3 Capabilities

Comes with abundant Layer 3 routing protocols that support a scalable network. Static Routing, RIP, OSPF, DHCP Server, and DHCP Relay are supported.

Highly Available

ERPS (Ethernet Ring Protection Switching) ensures rapid protection and recovery in ring topologies, which is essential for maintaining network uptime in medium business environments.

Enhanced Security Functions

Defend against a range of network threats with ACL support (IPv4 & IPv6), Dynamic ARP Inspection, IEEE 802.1X, MAB, Port Security, and Secure Shell.

Omada SDN

Integration into the Omada system brings centralized cloud management and a series of management features such as Zero-Touch Provisioning (ZTP).† The Omada Software Defined Networking (SDN) platform integrates network devices, including access points, switches, and gateways, providing 100% centralized cloud management—all controlled from a single interface.

Apart from the ability to be centrally managed via the web or the Omada app, SG5452X is also easy to manage via an intuitive web-based Graphical User Interface (GUI) or an industry-standard Command Line Interface (CLI). For both management methods, traffic is protected through SSL or SSH encryption. SNMP (v1/v2c/v3) and RMON support enable the switch to be polled for valuable status information and to send traps for abnormal events.
- 8 10/100/1000Mbps Auto-Negotiation RJ45 ports supporting Auto-MDI/MDIX
- Green Ethernet technology saves the power up to 82%
- IEEE 802.3x flow control provides reliable data transfer
- Steel housing, desktop or wall-mounting design
- Support 802.1p/DSCP QoS1 and IGMP Snooping function1
- Plug and play, no configuration needed

What This Product Does

The TP-LINK 8 10/100/1000Mbps Desktop Switch TL-SG108 provides you an easy way to make the transition to gigabit Ethernet. Increase the speed of your network server and backbone connections, or make gigabit to the desktop a reality. Moreover, TL-SG108 adopts lower power consumption design. With the innovative energy-efficient technology, the TL-SG108 can save up to 82% of the power consumption, making it an eco-friendly solution for your home or office network.
Gigabit Switch
Featured with 8 10/100/1000Mbps ports, TL-SG108 greatly expands your network capacity, enabling instant large files transferring. So,power users in the home, office, workgroup, or creative production environment can now move large, bandwidth-intensive files faster. Transfer graphics, CGI, CAD, or multimedia files across the network instantly.

Go Green With Your Ethernet

You now have the choice to go green when upgrading to a gigabit network! This new generation TL-SG108 features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status and cable length to limit the carbon footprint of your network.
Power down Idle Ports
When a computer or network equipment is off, the corresponding port of a traditional switch will continue to consume considerable amounts of power. The TL-SG108 can automatically detect the link status of each port and reduce the power consumption of ports that are idle, resulting in up to an 82% reduction in power use.
Power Budget According to Cable Length
Ideally, shorter cable would use less power because of less power degradation over their length; this is not the case with most devices as they will use the same amount of power across the cable regardless of the length.

Traffic Optimization
802.1p and DSCP QoS1 enable smooth latency-sensitive traffic such as voice and video, and IGMP Snooping1 optimizes the Multicast data stream.

Easy to Use

The auto features of this gigabit switch make installation plug and play and hassle-free. No configuring is required. Auto MDI/MDIX eliminate the need for crossover cables. Auto-negotiation on each port senses the link speed of a network device (either 10, 100, or 1000 Mbps) and intelligently adjusts for compatibility and optimal performance.
The TL-SG105PE is an 5-port Gigabit Easy Smart Switch with 4 PoE+ ports, represents a powerful upgrade from an unmanaged switch. It is designed specially for small businesses that require simple network management and PoE function. The TL-SG105PE can connect and power up to four PoE devices, such as wireless access points (APs), IP cameras, and IP phones. Through its web-based user interface and management utility, the TL-SG105PE offers a variety of useful features, including network monitoring, traffic prioritization, PoE Auto Recovery and enhanced QoS. Additionally, with port-based, tag-based and MTU VLAN, TL-SG105PE can improve security and meet more network segmentation requirements.

Power Over Ethernet
4 of the 5 Auto-Negotiation RJ45 ports (port 1 to port 4) of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af/at compliant Powered Devices (PDs).

Overload Arrangement
TL-SG105PE has the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is >= 65 W, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port.

Intelligent Power Management
Priority (port 1>port 2>port 3>port 4): This function will help protect the system if the system power becomes overloaded. For example, Port 1, 2 and 4 are consuming 15.4 W respectively. If an additional PoE device with 20 W is inserted to port 3, the system will cut off the power of port 4 to compensate for the overload.

Effective Management
TL-SG105PE offers network monitoring for users to observe traffic behavior. Through its web-based user interface and management utility, the TL-SG105PE offers a variety of useful features, including network monitoring, traffic prioritization, PoE Auto Recovery and enhanced QoS.
With Port Mirroring, Loop Prevention and Cable Diagnostics features, TL-SG105PE can identify and even locate connection problems on your business network. Also, administrators can designate the priority of the traffic based on Port Priority, 802.1P Priority and DSCP Priority, to ensure that voice and video are always clear, smooth and lag-free.
Additionally, to improve security and network performance, TL-SG105PE supports MTU VLAN, port-based VLAN and 802.1Q-based VLAN functions. PoE Auto Recovery automatically reboots your dropped or unresponsive PoE-powered devices.
TL-SG105PE is an upgrade from the plug-and-play Unmanaged Switch, delivering great value while empowering your network and similarly delivering great value to the end user.

Easy to Use
TL-SG105PE is easy to use and manage. Auto MDI/MDI-X crossover on all ports eliminate the need for crossover cables or uplink ports. Auto-negotiation on each port senses the link speed of a network device (either 10, 100, or 1000 Mbps) and intelligently adjusts for compatibility and optimal performance. Its compact size makes it ideal for desktops with limited space. Dynamic LED lights provide real-time work status display and basic fault diagnosis.
TP-Link 5-Port Gigabit Easy Smart Switch with 4-Port PoE+. Switch layer: L2. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 5. MAC address table: 2000 entries, Switching capacity: 10 Gbit/s. Networking standards: IEEE 802.1Q, IEEE 802.1p, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3i, IEEE 802.3u, IEEE.... DC input voltage: 53.5 V. Power over Ethernet (PoE)
TP-Link | Omada L2+ managed switches provide high performance, powerful L2 and L2+ features like static routing, enterprise-level QoS, advanced security strategies and a bundle of ISP features. The 10-gigabit ports ensure high-speed data transfer, and their backward compatility with gigabit products reserves room for network upgrades, therefore guarantees stable and long-term usability. The IP-MAC-Port Binding (IMPB) and Access Control List (ACL) functions protect against broadcast storm, ARP and Denial-of-Service (DoS) attacks, etc. Quality of Service (QoS, L2 to L4) provides enhanced traffic management capabilities to move your data smoother and faster. The OAM function helps facilitate network management. Moreover, the easy-to-use web management interfaces, along with CLI, SNMP and Dual Image mean faster setup and configuration with less downtime. TP-Link | Omada L2+ 10-gigabit managed switches provide a reliable, secure solution for enterprise, campus and ISP networks.
Price
Regular price $1,675.49
Sale price Regular price
Regular price $70.64
Sale price Regular price
Regular price $101.81
Sale price Regular price
Regular price $133.10
Sale price Regular price
Regular price $541.39
Sale price Regular price
Product variants

Special Offer

FREE SHIPPING ON ORDERS OVER $550 IN SELECTED AREAS

Explore our FAQ

Contact Us

Where do the specifications come from?

Product specifications are sourced from Icecat and displayed only when supporting data is available. Where information is missing, the field is left blank rather than populated with estimated or inferred values.

A Partnership-First Approach

At NUTEC, we take a partnership-first approach to every engagement. We start by understanding your business - its challenges, priorities, and long-term goals before recommending any technology solution. From workplace modernization and cloud infrastructure to cyber security and systems integration, our team works closely with you at every stage, ensuring the right technology is procured, implemented, and supported with clarity and confidence. We believe in transparent communication, tailored outcomes, and building lasting partnerships that grow with your business.

Support Hours

Mon–Fri, 9am–5pm AEST

Phone

0401 113 232

Email

sales@nutec.com.au

Address

Online Store