Skip to content

AU

FREE SHIPPING ON ORDERS OVER $550 IN SELECTED AREAS

103164251_0353245427.jpg

D-Link DGS-F1210-18PS-E network switch Managed L2 Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) Grey

Regular price $603.89
Sale price Regular price

Key specifications

  • Product colour: Grey
  • Switch type: Managed
  • Operating temperature (T-T): 0 - 40 °C
  • Operating relative humidity (H-H): 10 - 90%
  • Networking standards: IEEE 802.1D, IEEE 802.1Q, IEEE 802.1af, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3at, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
  • Basic switching RJ-45 Ethernet ports quantity: 16
  • Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000)
  • Power over Ethernet (PoE): Yes
  • Switching capacity: 36 Gbit/s
  • MAC address table: 8000 entries
  • 10G support: No
  • Storage relative humidity (H-H): 10 - 95%
  • LED indicators: PoE, Power, System
  • Quality of Service (QoS) support: Yes
  • Rack mounting: Yes
  • Flow control support: Yes
  • Jumbo frames support: Yes
  • Switch layer: L2
  • Forwarding rate: 23.8 Mpps
  • Jumbo frames: 10000

Data transmission

Number of queues
8

Design

Number of fans
1 fan(s)

Management features

ARP inspection
Yes
Configuring Location Settings (CLI)
Yes
System event log
Yes
Traffic classification
Yes
Web-based management
Yes

Multicast features

Multicast features
Interface-based multicast traffic statistics
Multicast support
Yes

Network

Active link detection
Yes
Auto-negotiation
Yes
Cable types supported
Cat5e
Ethernet LAN data rates
10,100,1000 Mbit/s
Link aggregation
Yes
MAC address auto-aging supported
Yes
MAC address auto-learning supported
Yes
Number of VLANs
4000
Port mirroring
Yes
Rate limiting
Yes
Spanning tree protocol
Yes
VLAN support
Yes

Operational conditions

Storage temperature (T-T)
-20 - 70 °C

Performance

Noise level
35 dB

Ports & interfaces

Console port
RJ-45
Power connector
AC-in jack
SFP module slots quantity
2

Power

AC input frequency
50 - 60 Hz
AC input voltage
100 - 240 V
Number of power supply units
1
Power consumption (max)
150 W
Power consumption (typical)
15 W
Power source
AC
Power supply included
Yes

Power over Ethernet (PoE)

Power over Ethernet (PoE) power per port
30 W
Power over Ethernet plus (PoE+) ports quantity
16
Total Power over Ethernet (PoE) budget
135 W

Protocols

Supported network protocols
IPv4, IPv6

Security

Authentication
Port-based authentication
Authentication type
IEEE 802.1x
BPDU filtering/protection
Yes
DHCP features
DHCP snooping
IGMP snooping
Yes
IP-MAC-Port binding
Yes
Loop protection
Yes
MAC address entries
Dynamic MAC address entries, Static MAC address entries
Password protection
Yes
Queue scheduling algorithms
SP, WFQ, Weighted Round Robin (WRR)
Security algorithms
HTTPS, SSH
SSH/SSL support
Yes

Weight & dimensions

Depth
18 cm
Height
4.4 cm
Weight
2.9 kg
Width
44 cm

THE NUTEC ADVANTAGE

VENDOR NEUTRAL

Advice focused on the solution that best fits your business needs.

END TO END DELIVERY

From selection through implementation, support, and beyond.

BUSINESS FIRST OUTCOMES

Delivering solutions focused on measurable outcomes.

LONG TERM PARTNERSHIP

Built on trust, support, and shared success.

Compare With Similar Items

Description
The D-Link DGS-F1210 Series Smart Managed Switches are the latest generation of switches to provide increased Power over Ethernet (PoE) output, a range of physical interface types, multiple management interfaces, and advanced Layer 2 features. With all of these features combined, the DGS-F1210 Series provide a cost-efficient and flexible solution for expanding any business network.

PoE Support
The DGS-F1210 Series switches provide Power over Ethernet (PoE) support, reducing deployment time for IP cameras, VoIP phones, and access points. Dedicated power adapters are no longer required, as the DGS-F1210 Series switches comply with IEEE 802.3af (PoE) and 802.3at (PoE+) standards and provide up to 30 watts per port. The DGS-F1210-26MPS-E model offers extended PoE budget of up to 380 Watts. Additionally, 8 PoE ports in each switch offer Long Reach PoE technology1, allowing the use of longer network cable runs which are normally limited to 100m. The Long Reach PoE technology supports cables up to 250m long.

Seamless Integration
The DGS-F1210 Series support a range of port and media types, including 10/100/1000BASE-T RJ-45 ports, PoE and PoE+ and Gigabit SFP ports. The DGS-F1210-10PS-E, DGS-F1210-18PS-E, DGS-F1210-26PS-E and DGS-F1210-26MPS-E models feature 2 SFP ports allowing you to choose the most suitable media type for your requirements. All DGS-F1210 Series switches include support for IEEE 802.3af/at and high power budgets, allowing more PoE devices to be powered by the switch and for devices to be installed in remote locations without immediate access to power outlets.

The DGS-F1210 Series come equipped with a complete line-up of Layer 2 features, including IGMP snooping, port mirroring, Spanning Tree Protocol (STP), and Link Aggregation Control Protocol (LACP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for
fast, reliable data transfers. The DGS-F1210 Series also support advanced features such as port segmentation, which allow network administrators to divide the network into VLANs, increasing network efficiency. Network maintenance features include loop detection and cable diagnostics.
Loop detection significantly speeds up troubleshooting by automatically detecting and shutting down switching loops. The cable diagnostics feature, designed primarily for administrators and customer service representatives, determines the cable quality and quickly discovers errors, allowing for hassle-free diagnostics and maintenance.

The DGS-F1210 Series support 802.1X port-based authentication, allowing the clients to be authenticated through external RADIUS servers. The Access Control List (ACL) feature helps to enhance network security and helps to protect the internal IT network. The DGS-F1210 Series also
feature Address Resolution Protocol (ARP) spoofing prevention, which helps to provide protection from attacks on the network that could allow an intruder to sniff data frames, modify traffic, or bring traffic to a halt altogether by sending fake ARP messages. To help prevent ARP spoofing attacks, the switch uses packet control ACLs to block invalid packets that contain fake ARP messages. The DHCP Snooping feature filters DHCP replies on unauthorised ports to prevent them from being assigned an IP address.
TP-Link’s brand new Omada smart switches provide huge upgrade comparing with previous versions. The switches can be managed by Omada SDN Controller, which provides professional and reliable one-step solutions. Integrated L2 and L2+ features such as 802.1Q VLAN, QoS, IGMP Snooping and static routing provide cost-effective networking solutions for small and medium-sized businesses without sacrificing enhanced usability and strong performance.
TP-Link’s brand new Omada smart switches provide huge upgrade comparing with previous versions. The switches can be managed by Omada SDN Controller, which provides professional and reliable one-step solutions. Integrated L2 and L2+ features such as 802.1Q VLAN, QoS, IGMP Snooping and static routing provide cost-effective networking solutions for small and medium-sized businesses without sacrificing enhanced usability and strong performance.
TP-Link’s brand new Omada smart switches provide huge upgrade comparing with previous versions. The switches can be managed by Omada SDN Controller, which provides professional and reliable one-step solutions. Integrated L2 and L2+ features such as 802.1Q VLAN, QoS, IGMP Snooping and static routing provide cost-effective networking solutions for small and medium-sized businesses without sacrificing enhanced usability and strong performance.
PoE-Powered PoE Switch for
Simplified Outdoor Network Deployment

Omada 5-Port Gigabit Smart Switch with 1-Port PoE++ In and 4-Port PoE+ Out

Standard PoE Passthrough to Extend Power and Data Transmission Distance up to 200 m Without Losing Gigabit Speeds
Eliminate mains access location limits and transmit data and power through one cable, simplifying installation and cutting deployment costs. Doubles PoE source-to-device connection distance from 100 m (328 ft) to 200 m (656 ft), perfect for long-range surveillance cameras and access points.

One Gigabit PoE++ In Port and Four Gigabit PoE+ Out Ports
Supports up to 64 W / 44 W / 19 W/ 6 W PoE budget output when powered by 802.3bt Type 4 (90 W), 802.3bt Type 3 (60 W), 802.3at, and 802.3af PoE, respectively.** The PoE-PD switch automatically detects the required PoE power for your devices and protects your non-PoE equipment from being damaged.

Specially Designed Weatherproof Enclosure for Outdoors
Rated as IP55 during Ingress Protection testing, a resilient weatherproof enclosure protects the switch against harsh outdoor conditions.

Easy Installation to Flexibly Fit Your Needs
Easy to mount to a wall or pole with the provided mounting kits. Its compact design allows you to place the switch flexibly, such as in an outdoor Junction Box.

Value-Added Features Foster Touchpoint Experiences

Static Routing
Helps route internal traffic for more efficient use of network resources.

Access Control List (ACL)
ACL serves as a virtual admin, allowing all connected devices to obtain data in accordance with user-defined network rules and help you create the network regulations you need.

QoS for Lag-Free Experiences
Designate the priority of traffic based on QoS, ensuring latency-sensitive applications, like voice and video, remain clear and lag-free.

VLAN for Security and Flexible Management
VLAN allows for logical grouping management of devices in different physical LANs, improving information security and reducing data congestion.

Software Defined Networking (SDN) with Cloud Access
Omada’s Software Defined Networking (SDN) platform integrates network devices, including access points, switches, and gateways, providing 100% centralized cloud management. Omada creates a highly scalable network—all controlled from a single interface.
Price
Regular price $603.89
Sale price Regular price
Regular price $303.44
Sale price Regular price
Regular price $323.93
Sale price Regular price
Regular price $186.14
Sale price Regular price
Regular price $212.60
Sale price Regular price
Product variants

Special Offer

FREE SHIPPING ON ORDERS OVER $550 IN SELECTED AREAS

Explore our FAQ

Contact Us

Where do the specifications come from?

Product specifications are sourced from Icecat and displayed only when supporting data is available. Where information is missing, the field is left blank rather than populated with estimated or inferred values.

A Partnership-First Approach

At NUTEC, we take a partnership-first approach to every engagement. We start by understanding your business - its challenges, priorities, and long-term goals before recommending any technology solution. From workplace modernization and cloud infrastructure to cyber security and systems integration, our team works closely with you at every stage, ensuring the right technology is procured, implemented, and supported with clarity and confidence. We believe in transparent communication, tailored outcomes, and building lasting partnerships that grow with your business.

Support Hours

Mon–Fri, 9am–5pm AEST

Phone

0401 113 232

Email

sales@nutec.com.au

Address

Online Store